Carrier ComfortChoice Touch User Manual page 32

Programmable communicating thermostat
Table of Contents

Advertisement

THE BASIC SETUP SCREEN
3. When the RESET button is pressed, the "Change Filter in" value will reset
to its original value, and the reminder will go away. Therefore, the filter
should be replaced when RESET is pressed.
4. Press the DONE button to save the changes and return to the Home
Active Screen, or press the CANCEL button if you are not ready to
replace the filter, which will ignore the reset.
5. If the RESET button was not pressed and either the CANCEL or DONE
buttons are pressed, the filter reminder shall remain visible on the Home
Active screen with an open envelope next to the FILTER button. This
indicates the message has been read, but the filter timer has not been
reset. See Fig. 18.
Fig. 17 - - Filter Change Required
32
A11082

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents