Pre- -Cooling Default Settings; Modifying Pre- -Cooling Date Settings - Carrier ComfortChoice Touch User Manual

PRE- -COOLING SCHEDULES
Pre- - Cooling Default Settings
Default settings for Pre- -Cooling 1 and 2 (PC1and PC2) would be as follows:
PC1 START = 1pm, OFFSET = 2 degrees, DURATION = 1 hour
PC2 START = 11am, OFFSET = 0 degrees, DURATION = 0 hour
When user tries to setup pre- -cool settings, defaults should be pretty close to what
may be expected. After the above settings for pre- -cooling are configured, the
user would use the NEXT button to select the dates in which to run these
pre- -cool settings.
Modifying Pre- - Cooling Date Settings:
The user would then see the two screens below which allow them to select
START and END dates they wish to have pre- -cooling run. This allows for a one
time setup of the summer months if desired. After making that selection, use the
NEXT button to complete the setup or CANCEL if you wish to quit.
Fig. 71 - - Pre- -Cooling Time Period Setting
106
A14014