Carrier ComfortChoice Touch User Manual page 105

PRE- -COOLING SCHEDULES
Pressing the Pre- -Cooling button opens the Pre- -Cooling Setting screen, as
shown in Fig.70.
This setup screen allows you to configure two separate cooling periods
(Pre- -Cool 1, Pre- -Cool 2) or turn OFF Pre- -Cool if desired. Each of the buttons
are defined below:
PRE- -COOL – Selection of pre- -cool mode – Off, Pre- -Cool1 , Pre- -Cool2.
If OFF is selected, there will be no other setting buttons shown.
START – the time to begin that selected cooling period. The time can be
changed in 15 minute increments.
OFFSET – Pre- -Cool offset (Range 0- -10 degrees) that will be applied to
the user's current scheduled cooling setpoint by that number of degrees.
DURATION – The time the user wishes to run the pre- -cooling in 15
minute increments from (0 to 3 hours).
Fig. 70 - - Pre- -Cooling Settings
105
A14013