Carrier ComfortChoice Touch User Manual page 29

THE BASIC SETUP SCREEN
If the Screen Saver button is pressed on the Screen menu, the following screen
will be displayed.
A11117
Fig. 14 - - The Set Screen Saver Screen
This screen allows the user to configure whether a screen saver is displayed if a
valid one is saved in the thermostat memory. If a screen saver has been saved,
when ON is selected, the thermostat will display the screen saver after 25
seconds of idle time. When OFF is selected, a screen saver will not be displayed
- - even if a valid one was saved. See the USB Support section for instructions on
how to load a screen saver into the thermostat.
After 60 seconds of no button presses, the screen will return to the Screen menu.
29