Table of Contents
Advertisement
8.
Follow the on-screen instructions to send a CSR to a certificate authority.
9.
Click Export Certificate.
10. Perform steps
screen.
11. Follow the on-screen instructions to install a certificate from the certificate authority.
12. Click Submit.
13. Go to
"Enabling encryption" on page 57
Enabling encryption
After you creating a certificate, perform the following procedure to enable encryption.
When you enable encryption, the communication is encrypted the next time you change
the settings from the web page.
1.
Access the machine's web page and log in as the administrator.
2.
Select Admin Setup.
3.
Select Network > Security > Protocol ON/OFF.
4.
Select Enable for the desired protocol.
5.
Click Submit.
Launching the web page
1.
Launch a web browser.
2.
Type the IP address of the MFP in the URL field of your browser and then press
Enter. For example http://10.18.207.102
1
to
3
in
"Creating a certificate" on page 56
Advanced network settings > 57
to enter the encryption
to enable encryption.
Hide quick links:
Advertisement
Table of Contents
