Problem Area
Items to Inspect
Inspect the power key and the Flash
Flex Foil
If the issue is still not resolved
1210-5425 Rev1
©
Company Internal
Sony Ericsson Mobile Communications AB
Repair Action
•
Make sure the power key is properly
positioned in the frame.
•
If dirt or debris is detected – Clean
both the key and the switch
•
If the key is damaged – Replace it
•
If the Flash Flex is damaged –
Replace it
Note: New Flash Flex Require
calibration with ITP in SL4 centre
•
Escalate to an electrical repair level
Trouble Shooting Guide, Mechanical
Inspection Reference
7(33)