1.2.2
Liquid damage sticker
On the pictures below you will see the different between a sticker that has been in contact with liquid (Fig. 1.2.2) and with one that
hasn't (Fig. 1.2.1).
This sticker is ok
Fig. 1.2.1
1.2.3
Action
Make a general visual inspection for misuse, corrosion or oxidation from liquid damage. No further action should be taken for a liquid
damaged phone. Handle the unit according to local directives.
1.2.4
Gaskets
Any gaskets that are damaged before or during repair should be replaced.
1210-5425 Rev1
©
Company Internal
Sony Ericsson Mobile Communications AB
This sticker is not ok
The white sticker that has been in contact
with liquid turns into a red or pink sticker. In
this case you should check the phone for
liquid damage.
Note: There must be clear marks after liquid
on the PCB before rejecting the phone for
repair.
Fig. 1.2.2
Trouble Shooting Guide, Mechanical
5(33)