Gear Shifting Shaft - Suzuki GN125F Service Manual

GEAR SHIFTING SHAFT

REMOVAL
Remove gear shifting lever.
Remove the clutch. (Refer to page 3-20)
Remove the gear shifting shaft
Remove the screws, gear shifting cam guide plate
Remove the gear shifting driven gear
shifting pawl pin 6
INSPECTION
Check the return spring
for wear or bending.
REASSEMBLY
Reassemble the gear shifting shaft in the reverse order of
removal, pay attention to the following points:
When installing the gear shifting pawls to the driven gear
the large shoulder
Install the cam guide. Apply a small quantity of THREAD
LOCK "1342" to the threaded parts of the securing screws.
99000 32050: Thread lock "1342" -
.
1
and return spring 7
7 for damage, gear shifting shaft 8
A
must face to the outside as shown.
ENGINE
2
3
and .
, pawl , gear
4 5
.
,
3-26