Lighting And Signal; Chassis And Engine Mounting Bolts And Nuts - Suzuki GN125F Service Manual

REAR ABSORBER
Press the rear carrier, move the rear absorber up and down
four or five times to check for the noise or smooth movement.
Inspect the rear absorber spring for damage, deformation or
oil leakage.

LIGHTING AND SIGNAL

Inspect initial 1 000 km and every 5 000 km
Inspect the headlight, left and right turn signal light, tail light /
brake light and dashboard signal light, replace the light if there
is something unusual. (Refer to page 6-7)

CHASSIS AND ENGINE MOUNTING BOLTS AND NUTS

Inspect initial 1 000 km and every 5 000 km
The nuts and bolts listed are important parts, and they must be in good condition for safety. They must be
re-tightened, as necessary, to the specified torque with a torque wrench.
Front axle nut
1
Front brake caliper mounting bolts
2
Brake hose union bolt
3
Front brake disc mounting bolts
4
Front absorber cap bolts
5
Handlebar clamping bolts
6
Steering bolt
7
Lower bracket bolts (front absorber clamp bolts)
8
9
Rear absorber fitting nuts
Rear axle nut
10
Rear brake cam lever bolt
11
Rear torque link bolts
12
Engine mounting bolts
13
Engine hanging nuts
14
Rear swing arm shaft nut
15
Exhaust pipe bolt
16
PERIODIC MAINTENANCE
ITEM
2-15
•
N•m Kg m
36-52 3.6-5.2
18-28 1.8-2.8
20-25 2.0-2.5
18-28 1.8-2.8
35-55 3.5-5.5
12-20 1.2-2.0
35-55 3.5-5.5
25-35 2.5-3.5
22-35 2.2-3.5
50-80 5.0-8.0
6-8 0.6-0.8
10-16 1.0-1.6
33-39 3.3-3.9
22-33 2.2-3.3
50-80 5.0-8.0
11-15 1.1-1.5