Two-Post Center-Mount Configuration - Dell Networking S4048 Installation Manual

Figure 7. Two-post flush-mount configuration
2 Attach one rail to the front post flange with two user-supplied screws, item 2.
3 Slide the plunger bracket forward against the vertical post and secure the plunger bracket to the post flange with two user-supplied
screws. Refer to item 3.
4 Repeat this procedure for the second rail.

Two-post center-mount configuration

CAUTION: Your system is not NEBS Earthquake Z4-compliant if you use this installation method.
1 Slide the plunger bracket rearward until it clicks into place and secure the bracket to the front post flange with two user-supplied
screws, item 1.
S4048–ON installation 19