Ports On The Cisco Ucs 6454 Fabric Interconnect - Cisco UCS 6454 Installation Manual

Ports on the Cisco UCS 6454 Fabric Interconnect

• Intel Xeon D-1528 v4 Processor, 1.6 GHz
• 64 GB of RAM
• 8 MB of NVRAM (4 x NVRAM chips)
• 128 GB SSD (bootflash)
Figure 1: Cisco UCS 6454 Fabric Interconnect Rear View
1
3
For additional information about the port groups, see
The Cisco UCS 6454 Fabric Interconnect chassis has two power supplies and four fans. Two of the fans
provide front to rear airflow.
Figure 2: Cisco UCS 6454 Fabric Interconnect Front View
1
3
Ports on the Cisco UCS 6454 Fabric Interconnect
The ports on the Cisco UCS 6454 Fabric Interconnect can be configured to carry either Ethernet or Fibre
Channel traffic. You can configure only the first eight ports to carry Fibre Channel traffic. The ports cannot
be used by a Cisco UCS domain until you configure them.
Cisco UCS 6454 Fabric Interconnect Hardware Installation Guide
2
Ports 1-8 (Unified Ports 10/25 Gbps
Ethernet or FCoE or 8/16/32 Gbps Fibre
Channel)
Ports 45-48 (1/10/25 Gbps Ethernet or
FCoE)
Power supply and power cord connector
L1 port, L2 port, RJ45, console, USB port,
and LEDs
2 Ports 9-44 (10/25 Gbps Ethernet or FCoE)
4 Uplink Ports 49-54 (40/100 Gbps Ethernet
or FCoE)
Port Numbering, on page 4.
2 Fans 1 through 4, numbered left to right, when
facing the front of the chassis
Product Overview