Mode Selection - Invacare Comet Series PRO User Manual

Deactivating curve control
1.
Press the setting key for five seconds. The LED beside the key
and the symbol for curve control in the LCD display (if fitted)
illuminate. Curve control is deactivated.
Activating curve control
1.
Press the setting key for five seconds. The LED beside the key
and the symbol for curve control in the LCD display (if fitted) go
out. Curve control is activated.

6.15 Mode selection

In the LCD display you can switch between four different modes.
ODO mode: Displays the total distance driven by the scooter.
TRIP mode: Displays the distance, driven since the last reset.
TEMP mode: Displays the temperature.
TIME mode: Displays the time.
Switching between modes
1. Press the setting key to switch between the modes, shown in
the display.
1603455-A
Adjusting modes
You can adjust the modes to your requirements.
1.
Press the setting key to choose the mode you want to adjust.
2.
Press both direction indicator keys for two seconds. Depending
on the mode do one of the following:
a.
ODO mode: Press left indicator key to select
mile>>km>>hour.
b.
TRIP mode: Press both direction indicator keys to reset
last trip.
c.
TEMP mode: Press left indicator key to select °C or °F.
Usage
37