Cisco Explorer 8300C User Manual page 17

Connecting to an eSATA Hard Disk Drive (optional),
continued
Guidelines for Using the eSATA Hard Disk Drive
The eSATA hard disk drive requires continuous power. If the eSATA drive loses power while the DVR is plugged in,
the DVR may stop current recordings or not provide enough space for future recordings. Follow these guidelines for
using the eSATA drive:
• Do not plug in the power cord for the eSATA drive to a switched outlet or to the AC outlet on the DVR.
• Do not turn off , disconnect, or unplug the eSATA drive while the DVR is plugged in.
Disconnecting the eSATA Hard Disk Drive
Complete the following steps to disconnect the eSATA drive safely.
1. Make sure that the DVR is powered off .
2. Disconnect the power cord from the DVR and wait for at least 10 seconds.
3. Disconnect the power cord and data cable from the eSATA drive.
Note: If you improperly disconnect your eSATA drive, you will receive an error message and you will be required to
restart the DVR upon reconnecting.
17