Color Coding Wire Clips; Single And Split-Phase Connections - Fluke 1735 Getting Started

1735
Getting Started

Color Coding Wire Clips

The Logger includes a set of color clips that you can attach to the test leads.
These help you keep track of which current probe lead and voltage lead
belongs to which phase. The large clips are for the current probe leads and the
small clips are for the voltage leads. Use the plastic rod tool to help you attach
the clips.

Single and Split-Phase Connections

For Single Phase + Neutral, refer to Figure 5 and connect the leads as follows:
Voltage:
Line
Line (same)
Line (same)
N
Current:
L1
Not connected
Not connected
N
12
800.561.8187
Network
Network
www.
Test Leads
A (L1)
B (L2)
C (L3)
N
Test Leads
A (L1)
B (L2)
C (L3)
N
.com
information@itm.co