Connecting The Logger To The Network - Fluke 1735 Getting Started

Connecting the Logger to the Network

Use the original cables only for connecting the current probes and the voltages
to the Logger. If these are damaged do not use them. Before connecting to the
load, make sure that all plugs are connected correctly to the Logger and
locked, in order to prevent contact with live conductors.
800.561.8187
To prevent the risk of electric shock, when
connecting current circuits, the corresponding test
leads must first be connected to the Logger and then
to the load.
To prevent shock or personal injury, keep fingers
behind the tactile barrier, see Figure 4.
When using either flexi-probes or current clamp sets, make sure the
arrow on the current probe points towards the load.
Figure 4. Using the Optional Microclamps
www.
XWWarning
Note
Single Insulated
Current Carrying
Conductor
Release
Button
.com
Power Logger
Measuring Functions
Load Direction
Arrow
Tactile Barrier
edx045f.eps
information@itm.co
11