Engine - Stihl MS 240 Instruction Manual

Hide thumbs Also See for MS 240:
Table of Contents

Advertisement

4.7

Engine

Always check and, if necessary,
repair the following parts before
looking for faults on the engine:
- Air filter
- Fuel system
- Carburetor
- Ignition system
Condition
Engine does not start easily, stalls
at idle speed, but operates normally
at full throttle
Engine does not deliver full power
or runs erratically
Engine overheating
18
Cause
Oil seals in crankcase damaged
Crankcase leaking or damaged
(cracks)
Piston rings worn or broken
Muffler / spark arresting screen
carbonized
Air filter dirty
Fuel/impulse hose severely kinked
or damaged
Decompression valve is not closed
Insufficient cylinder cooling. Air
inlets in fan housing blocked or
cooling fins on cylinder very dirty
Remedy
Replace the oil seals
Seal or replace the crankcase
Fit new piston rings
Clean the muffler (inlet and
exhaust), replace spark arresting
screen, replace muffler if necessary
Replace air filter
Fit new hoses or position them free
from kinks
Close, check and replace
decompression valve if necessary
Thoroughly clean all cooling air
openings and the cylinder fins
MS 240, MS 260, MS 260 C

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms 260

Table of Contents