Advertisement
QuickSpecs
Overview
4. Two (2) mezzanine I/O expansion slots
At A Glance
At A Glance
At A Glance
At A Glance
This document covers the HP ProLiant BL465c G7 server blade only. For more information on HP BladeSystem c-Class Enclosures
and HP BladeSystem c-Class Interconnect Components, please see the following QuickSpecs:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/12790_div.html
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/12810_div.html
HP BladeSystem c-Class Interconnect Components QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12524_div/12524_div.html
The BL465c G7 helps simplify network connections, lower infrastructure costs, and delivers the performance you expect for
demanding application workloads.
HP ProLiant BL465c G7 server blade includes:
Processor:
Processor
Processor
Processor
Up to two (2) Multi-Core AMD Opteron™ 6100 Series processors
Twelve-Core supports up to 2.2 GHz; 512 KB Level 2 cache memory per core; 12 MB Level 3 cache
Eight-Core supports up to 2.4 GHz; 512 KB Level 2 cache memory per core; 12 MB Level 3 cache
AMD SR5690 and SP5100 chipsets
Memory:
Memory
Memory
Memory
Sixteen (16) DIMM slots
Up to 256GB of PC3-8500 DDR3 Registered (RDIMM) memory, operating at 1066 MHz when fully populated at 2
DIMMs per channel in 16 slots
Up to 128GB of PC3-10600 DDR3 Registered (RDIMM) memory, operating at 1333 MHz when fully populated at 2
DIMMs per channel in 16 slots
Up to 64GB of PC3-10600 DDR3 Unbuffered (UDIMM) memory, operating at 1333 MHz when fully populated at 2
DIMMs per channel in 16 slots
Supporting memory interleaving (2:1)
NOTE:
NOTE:
NOTE: Each processor memory bus will operate at up to 1333 MHz with either one quad-rank (QR) or two single-
NOTE:
rank/dual-rank (SR/DR) DIMMs per processor memory channel and 1066 MHz with up to two QR or one QR and one
SR/DR DIMMs per processor memory channel with standard voltage (1.5V, PC3) DIMMs. Memory bus will operate one
speed slower when low voltage (1.35V, PC3L) memory is installed. Memory bus speeds may be further limited by the
speed of the memory used as well.
Storage Controller
Storage Controller
Storage Controller
Storage Controller:
Smart Array P410i RAID controller with 1 GB flash-backed write cache (FBWC). Supports RAID 0,1.
NOTE:
NOTE: The HP Smart Array P410i controller is required for all blades that support hot plug drives. See Factory
NOTE:
NOTE:
Integrated Models section for more information.
Internal Drive Support
Internal Drive Support
Internal Drive Support:
Internal Drive Support
Up to two (2) small form factor (SFF) SAS or SATA hot plug hard disk drives or SATA solid state drives
Network Controller
Network Controller:
Network Controller
Network Controller
One (1) integrated NC551i Dual Port FlexFabric 10Gb Converged Network Adapter supporting stateless TCP/IP
offload, TCP Offload Engine (TOE), Fibre Channel over Ethernet (FCoE) and iSCSI protocols
NOTE:
NOTE: Flex-10 capability requires the use of an HP Virtual Connect Flex-10 10Gb Ethernet module. Learn more at:
NOTE:
NOTE:
www.hp.com/go/virtualconnect
NOTE: Fibre Channel over Ethernet (FCoE) capability requires the use of an HP Virtual Connect FlexFabric 10Gb/24-
NOTE:
NOTE:
NOTE:
HP ProLiant BL465c Generation 7 (G7) Server Blade
HP ProLiant BL465c Generation 7 (G7) Server Blade
HP ProLiant BL465c Generation 7 (G7) Server Blade
HP ProLiant BL465c Generation 7 (G7) Server Blade
DA - 13654
Worldwide — Version 3 — June 24, 2010
8. Sixteen (16) PC3-8500 DDR3 Registered DIMMs, PC3-10600
DDR3 Registered DIMMs, or PC3-10600 DDR3 Unbuffered
DIMMs
Page 2
Advertisement
