Amt Configuration; Serial Port Console Redirection; Com1 Console Redirection Settings - Supermicro X11SAT User Manual

ME FW Image Re-Flash
Use this feature to update the Mangement Engine firmware. The options are Enabled and
Disabled.
AMT Configuration
Intel AMT
Select Enabled to use Intel AMT (Active Management Technology) to enhance system
performance. The options are Disabled and Enabled.
BIOS Hotkey Pressed
Select Enabled to use the BIOS Hotkey feature. The options are Disabled and Enabled.
Watch Dog
Select Enabled to allow AMT to reset or power down the system if the operating system or
BIOS hangs or crashes. The options are Disabled and Enabled.
OS Timer / BIOS Timer
These options appear if Watch Dog Timer (above) is enabled. This is a timed delay in
seconds, before a system power down or reset after a BIOS or operating system failure is
detected. Directly enter the value in seconds.
Serial Port Console Redirection
COM1 Console Redirection
Select Enabled to enable console redirection support for a serial port specified by the user.
The options are Enabled and Disabled.
*If the item above is set to Enabled, the following items will become available for user's
configuration:
COM1 Console Redirection Settings
This feature allows the user to specify how the host computer will exchange data with the
client computer, which is the remote computer used by the user.
COM1 Terminal Type
This feature allows the user to select the target terminal emulation type for Console
Redirection. Select VT100 to use the ASCII Character set. Select VT100+ to add color and
function key support. Select ANSI to use the Extended ASCII Character Set. Select VT-UTF8
to use UTF8 encoding to map Unicode characters into one or more bytes. The options are
ANSI, VT100, VT100+, and VT-UTF8.
89
Chapter 4: BIOS