Graphics Configuration - Supermicro X11SAT User Manual

SW Guard Extensions (SGX)
Use this feature to enable or disable the Intel Software Guard Extensions (SGX). SGX is a
set of CPU instructions that increases software security. The options are Disabled, Enabled,
and Software Controlled.
PRMRR Size
The BIOS must reserve a contiguous region of Processor Reserved Memory (PRM) in the
Processor Reserved Memory Range Register (PRMRR). This feature appears if SW Guard
Extensions is set to Enabled. The options are Auto, 32MB, 64MB, and 128MB.
Graphics Configuration
Primary Display
Use this feature to select the graphics device to be used as the primary display. The options
are Auto, IGFX, PEG, and PCIE.
Primary PEG
This feature allows the user to select the primary PCI Express Graphics (PEG) slot. The
default setting is CPU SLOT6 PCI-E 3.0 X16 and CPU SLOT4 PCI-E 3.0 X8 (IN X16).
Primary PCIE (PCI-Express Graphics)
This feature allows the user to specify which graphics card to be used as the primary
graphics card. The options are PCIE1, PCIE2, PCIE3, PCIE4, PCH SLOT5 PIC-E 3.0
X1, PCIE6, PCH SLOT3 PCI-E X1, PCH SLOT7 PCI-E 3.0 X1, PCIE9, PCIE10, PCIE11,
PCIE12, PCIE13, PCIE14, PCIE15, PCIE16, PCIE17, PCIE18, and PCIE19.
Internal Graphics
Select Auto to keep an internal graphics device installed on an expansion slot supported
by the CPU to be automatically enabled. The options are Auto, Disabled, and Enabled.
DMI/OPI Configuration
The following DMI information will display:
•
DMI
DMI VC1 Control
Use this feature to enable or disable DMI Virtual Channel 1. The options are Enabled and
Disabled.
DMI VCm Control
Use this feature to enable or disable the DMI Virtual Channel map. The options are Enabled
and Disabled.
79
Chapter 4: BIOS