WWW.FREESERVICEMANUALS.INFO
2-1. LCD UNIT (PD-166 BOARD)
2 Raise the Panel cabinet (R) assembly
in the direction of the arrow A ,
and slide it in the direction of the arrow B ,
to remove its claws.
3 Panel cabinet (R) assembly
1 Two screws
(M1.7 × 2.5),
EG grip (black)
5 Peel off
the Tape AS.
[PD-166 BOARD SERVICE POSITION]
REMOVING THE PD-166 BOARD
A
B
4 Turn over the
BL insulating sheet (K).
6 PD-166 board
LANC jack
CPC jig for LCD panel
(J-6082-529-A)
Worlf of free manuals
12/2
DCR-IP210/IP210E/IP220/IP220E
qa Remove soldering from the three points.
3 Screw
qd PCB clip
(M1.7 × 2.5),
EG grip (silver)
A
2 Harness (DP-088)
(20P)
4 Two screws
(M1.7 × 2.5),
EG grip (silver)
qs Back light
(Cold cathode fluorescent tube)
(205)
9 Liquid crystal
indicator module
1 Two screws
(M1.7 × 2.5),
EG grip (black)
Adjustment remote
commander (RM-95)
DC-IN connector
AC power
adaptor
2-3
WWW.NOSTATECH.NL
q; BL insulating sheet (K)
qg Inverter
transformer unit
qf Remove soldering
from the six points.
qh PD-166
board
7 Liquid crystal
indicator module (24P)
8 Liquid crystal
indicator module (7P)
6 Panel cabinet (L)
A
5 Peel off the
LCD light interception sheet.
PD-166 board
AC IN
qd PCB clip