Internal Connectors - Asus P5QL Manual

1.10.2

Internal connectors

1. Floppy disk drive connector (34-1 pin FLOPPY)
This connector is for the provided floppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using an FDD cable with a covered Pin 5.
P5QL-EM
2. Serial ATA connectors (7-pin SATA1, SATA2, SATA3, SATA4, SATA5,
SATA6)
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
drives.
P5QL-EM SATA Connectors
ASUS P5QL-EM
Floppy Disk Drive Connector
FLOPPY
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
SATA1 SATA2
GND GND
RSATA_TXP1 RSATA_TXP2
RSATA_TXN1 RSATA_TXN2
GND GND
RSATA_RXP1 RSATA_RXP2
RSATA_RXN1 RSATA_RXN2
GND GND
SATA3 SATA4
GND GND
RSATA_TXP3 RSATA_TXP4
RSATA_TXN3 RSATA_TXN4
GND GND
RSATA_RXP3 RSATA_RXP4
RSATA_RXN3 RSATA_RXN4
GND GND
SATA5 SATA6
GND GND
RSATA_TXP5 RSATA_TXP6
RSATA_TXN5 RSATA_TXN6
GND GND
RSATA_RXP5 RSATA_RXP6
RSATA_RXN5 RSATA_RXN6
GND GND
1-31