Boot Menu; Boot Device Priority - Asus P5QL Manual

Power Fan Speed [Ignored] or [N/A]
The onboard hardware monitor automatically detects and displays the Power
fan speed in rotations per minute (RPM). If the fan is not connected to the
motherboard, the field shows N/A. Select Ignored if you do not wish to display the
detected speed.
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage [xxxV] or
[Ignored]
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.
2.6

Boot menu

The Boot menu items allow you to change the system boot options. Select an item
then press <Enter> to display the sub-menu.
Main Advanced
Boot Settings

Boot Device Priority

Boot Settings Configuration
Security
2.6.1 Boot Device Priority
Main Advanced
Boot Device Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
1st ~ xxth Boot Device [XX Drive]
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system. Configuration options: [xx Drive] [Disabled]
2-34
Power Boot
v02.58 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Power
BIOS SETUP UTILITY
Tools Exit
Boot Tools
[1st FLOPPY DRIVE]
[Hard Drive]
[ATAPI CD-ROM]
Specifies the Boot
Device Priority
sequence.
A virtual floppy disk
drive (Floppy Drive B:)
may appear when you set
the CD-ROM drive as the
first boot device.
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Exit
Specifies the boot
sequence from the
available devices.
Select Screen
Select Item
Enter Go to Sub-screen
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 2: BIOS setup