Table of Contents
Advertisement
1. Program version upgrading
In the camera unit, program and graphic menu are stored.
Please check the version and update it if the version is not updated.
There are two method of program updating; using CompactFlash card or utilizing PC link cable.
Note:
1.
Be sure to use AC adaptor.
2.
If Mask ROM is mounted on the unit, updating the program is not possible.
1-1. How to confirm the program (graphic menu) version
1.
Boot the test mode.
Turn the power on while pressing DISP and MENU buttons simultaneously.
2.
Check the LCD display.
(Example)
TEST MODE
PROG
GMENU
· · · ·
1-2. Upgrading procedure using the CompactFlash card
(1) Copy the latest program ( 711rom.bin) and graphic menu ( 711gmenu.bin) on a CompactFlash card
then set the CompactFlash card on the camera.
(2) Connect an AC adaptor on the camera.
(3) Press DISP and MENU keys simultaneously and set the unit in PLAY mode then turn the power on.
Upgrading starts automatically.
Both program and graphic menu are upgraded.
(4) After about 40 seconds, upgrading is completed and unit turns the power off automatically.
(5) Chgange the CompactFlash card with the one for picture taking.
(6) Boot the test mode and confirm the program version.
Press DISP and MENU keys simultaneously and set the unit in PLAY mode then turn the power on.
(7) Finally, check the camera's function (shooting and playback).
00.
07.
28.
20.
01
99.
12.
27.
18.
12
Program version
Graphic menu version
— 6 —
Advertisement
Table of Contents
