Table of Contents
Advertisement
1. Tool
Soldering iron / solder / desoldering wire
Precision screwdrivers / Tweezers
Discharge tool (Resistor 1.5 kΩ 5 W) / Pliers
2. Remove battery and CF card.
3. Remove two screws at the side of the camera .
Screw
DISASSEMBLY
4. Remove the screws at the other side (× 2).
5. Remove the screws at the bottom (× 4).
6. While pushing the botton, open the case.
7. Remove the upper case from the bottom as
shown on the figure.
— 26 —
Screw
Screw
Advertisement
Table of Contents
