Philips 26HFL5561L/27 Quick Start Manual page 11

7 Clone TV configuration
data
You can copy the configuration data from a TV to a USB storage device
or vice versa. This enables you to bypass the setup menu and configure
multiple TVs by simply using the USB storage device.
This section describes how to clone the configuration data from a TV to
a USB storage device or from a USB storage device to a TV.
Clone data using a USB storage device
1
Press M on the setup remote control to display the setup menu.
2
to select SMARTCLONE > SOURCE.
Press
3
Press to select one of the following:
USB TO TV: To clone the data from a USB storage device
•
to a TV.
TV TO USB: To clone the data from a TV to a USB storage
•
device.
SMARTCLONE
SOURCE
USB TO TV
TV TO USB
Clone data from an RF channel
1
Press M on the setup remote control to display the setup menu.
2
to select SMARTCLONE > SOURCE > RF.
Press
3
Press to set the following:
CABLE TUNING: Select YES to access channel numbers
•
1-135. Select NO to access channel numbers 2-69.
RF CHANNEL NUMBER: Select an RF channel to retrieve
•
the configuration data from.
RF TO TV: To start the download of data from an RF
•
channel.
SOURCE
CABLE TUNING
RF CHANNEL NUMBER
RF TO TV
USB
>
>
SMARTCLONE
RF
YES
18
>
EN 9