1-2. Connecting the Cables
You can connect up to three cables to the printer. They all connect to the connector
panel on the back of the printer, which is shown below:
Power supply
Interface connector
connector
NOTE : Before connecting any of the cables, make sure that both
the printer and the host are turned off.
1-3. Connecting the Computer
You need an appropriate interface cable.
1. Plug the cable connector securely into the printer's interface connector.
2. Tighten the screws on both sides of the cable connector.
Drawer kick-out
connector
3. Attach the other end of the cable to the computer.
1-4. Connecting the Drawer
WARNING :
CAUTION :
5
6
Use a drawer that matches the printer specification. Using an improper drawer may
damage the drawer as well as the printer.
Do not connect a telephone line to the drawer kick-out connector; otherwise the printer
and the telephone line may be damaged.
Plug the drawer cable into the drawer kick-out connector on the back of the printer next
to the power supply connector.