Limitation To 45°C; Only And 4.10 Extending Maximum Floor Temperature Limitations To 45°C - Danfoss ECtemp Next Plus Installation Manual

Adjust Maximum Floor temperature according to need up
to 45°C
Power ON
Press M button for 6 seconds
Select P03 (Table in 4.2): raise floor temperature limitation
4�11 Table for 4�9 Change to Room control only and
4�10 Extending Maximum Floor temperature
limitations to 45°C
No. Function
P01 Room Sensor
Calibration
P02 Floor Sensor
Calibration
P03 Maximum
Room Temp.
Limitation
P04 Minimum
Room Temp.
Limitation
P05 Maximum
Room Temp.
Limitation
16
Danfoss ECtemp Next Plus
higher than 35°C by using the >
Setting
Offset:-10˚C to
+10˚C
Offset:-10˚C to
+10˚C
5-35˚C(Active in
Temperature Control
Mode 01)
5-35˚C(Active in
Temperature Control
Mode 01)
5-35˚C(Active in
Temperature Control
Mode 02)
Factory default
Danfoss ECtemp™
Next Plus
0˚C
0˚C
35˚C
5˚C
35˚C
Installation Guide