Advertisement
Group
Item
Icon
Icon
MOIRE CANCEL LEVEL
(PURITY)
VERT-CONVERGENCE
(CONVER.)
(MISC.)
○
○
A. Press "FACTORY PRESET" to restore to the factory preset level.
B. Press
and
buttons together, to restore to the factory preset level.
+
-
C. Set data does not change by the change of the signal timing.
If a non-Factory Preset timing is used, "FACTORY PRESET" does not work.
Downloaded from ManualMonitor.com Manuals
Item
To decrease the level of the moire-clear wave.
To eliminate an excessive green or white-back ground that may occur
when external sync signals are applied to the monitor.
To clamp the video signal at the
CLAMP PULSE POSITION
front of the H-Sync pulse.
FACTORY PRESET
To adjust the horizontal beam alignment on the full screen area.
HORIZ-CONVERGENCE
To adjust the vertical beam alignment on the full screen area.
FACTORY PRESET
DEGAUSS
To select the constant power
POWER SAVE
consumption mode.
To permit all OSD adjustments.
CONTROL LOCK
○
○
○
○
○
○
○
○
○
○
○
○
"BRIGHT" and "CONTRAST" are unavailable at the locked condition.
To move the OSD screen position
OSD POSITION
in a counter clockwise direction.
To adjust the time that the OSD screen disappear when no access.
OSD TURN OFF
Indicates the current scanning frequency, factory or user preset timing
DIAGNOSIS
number, and signal input connector.
To choose the language used on OSD.
LANGUAGE
ENG.....English, FRA.....French, ESP.....Spanish, GER.....German, JPN.....Japanese
To save the new setting with a
AUTO SAVE
confirmation message.
○
○
○
○
○
○
○
○
○
○
○
○
When selecting "OFF", if "SAVE" is not done before the OSD screen disappeared, the new setting is invalid.
ALL RESET
Restores all items to the factory preset level.
FACTORY PRESET
Press the Minus Button
-
+
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Press the Plus Button
-
+
To clamp the video signal at the
back of the H-Sync pulse. If you
connect to an older Macintosh, you
may need to press plus button.
To restore to factory preset level.
To restore to factory preset level.
To eliminate possible color shading
or impurity due to magnetic effects.
To select the power-save mode.
(Your computer must be set for power
management.)
To lock the OSD function except
for "BRIGHT" and "CONTRAST".
○
○
○
○
○
○
○
○
○
○
○
○
To move the OSD screen position
in a clockwise direction.
To save the new setting automati-
cally.
○
○
○
○
○
○
○
○
○
○
○
○
To restore to factory preset level.
x : Available
A
B
C
X X
X
-
-
-
X X X
X X X
-
-
-
-
-
-
X X X
X
○
○
○
○
○
○
○
○
X X X
X X X
-
-
-
X
X
○
○
○
○
○
○
○
○
-
-
-
-
-
-
Advertisement
