Table of Contents
Advertisement
BROWN/WHITE WIRE: (-) HORN PULSE OUTPUT - Output for the Negative HORN trigger. This wire will trigger the vehicles horn on
alerts and confirmations.
BLUE WIRE: (-) HOOD TRIGGER - Input wire for the hood pin. This wire is used to tell the alarm if the hood is open (ground on hood pin
wire). If the vehicle does not have a hood pin from the factory, you will need to install the one supplied with the unit.
ORANGE WIRE: (-) NEGATIVE WHEN ARMED/ STARTER DISABLE (500mA) - This wire has a negative output when the system is armed.
This output is used for disabling the starter or to activate the optional devices such as extra sensors, LED's, window roll-up modules,
voice modules, etc.
Wiring Diagram
Ignition Input (+)
12V Battery
COMPONENT MOUNTING
Orange
Blue
Hood Input (-)
Brown/White`
Horn Output (-)
Black/White
AUX 2 Output (-)
Grey
Trunk Release/
AUX 1 Output (-)
Brown
Green
Door Trigger (-)
Purple
Door Trigger (+)
Blue/White
Trunk Input (-)
WIRING
SP-102 Connector Side View
Single/Double Pulse
Jumper ON for Electric Locks, Jumper OFF for Vacuum Locks
Jumper ON for Single Pulse, Jumper OFF for Double Pulse Disarm/Unlock
Jp1
Jp2
GREEN/WHITE
LOCK OUTPUT (-)
BLUE/WHITE
UNLOCK OUTPUT (-)
LED INDICATOR
OVERRIDE/PROGRAMMING
STARTER KILL RELAY
SWITCH
(Not included)
85
Siren
Parking Light (+)
5
Electric/Vacuum
Electric or Vacuum Locks
Single or Double Pulse Disarm/Unlock
= Pre-Warn
= Full Alarm
87
87A
86
12 V
Ignition
30
Switch
Starter Wire
Hide quick links:
Advertisement
Table of Contents
