Asus ESC8000 G3 User Manual page 69

3. USB 2.0 connector (A-Type USB10)
These connectors are for USB 2.0 ports. Connect the USB module cable to connector
USB56, then install the module to a slot opening at the back of the system chassis.
These USB connectors comply with USB 2.0 specification that supports up to 480
Mbps connection speed.
4. USB connector (USB1)
This connectors provide the USB 2.0/3.0 signal on the front I/O board.
ASUS ESC8000 G3
4-9