Table of Contents
Advertisement
8.
Align and insert the golden fingers of the accelerator into the PCIE slot on the server
system. Ensure the card is completely seated on the slot.
9.
Secure the GPU card to the chassis with one screw on the power bar and two screws
on the rear bracket.
10.
Repeat step 1-9 if you need to install another GPU accelerator to the bracket.
Install the next GPU accelerator to the next available slot adjacent to PCIE9 slot.
2-28
Chapter 2: Hardware Setup
- Quick Links:
- Z10Pg-D24 Motherboard Layout
Hide quick links:
Advertisement
Table of Contents
