Id Sending On Udp - Sagem MORPHOACCESS 200 Installation Manual

I D S E N D I N G O N U
I D S E N D I N G O N U
You can use the Ethernet port to send the corresponding ID to the central
security controller. Connection should be made using port 11020.
Please refer to MorphoAccess Remote Messages Specifications for more
information about this functionality.

ID sending on UDP

/cfg/Maccess/Ethernet/
Send
IP
SAGEM Défense Sécurité document. Reproduction and disclosure forbidden.
82
D P
D P
0 Not activated
1 L'ID is sent on UDP
« aaa.bbb.ccc.ddd »
IP of the central
controller.
security
SK-0000011145-05