Mapping - Sagem MORPHOACCESS 200 Installation Manual

M a p p i n g
M a p p i n g
A succession of TLV will contain all the keys.
Mifare 1K card
192 bytes of data + 3 bytes of tag. 13 blocs will be required (195/16). 13
bytes will be left empty in the last used block.
This map will represent the position of each key:
Sector Block 1
0
1 T
2 K8
3 ...
4 K24 ..
5 K32 ...
• Key 1 will correspond to key A and will be copied in sector 0.
• Key 2 will correspond to key B and will be copied in sector 0.
• Key 3 will correspond to key A and will be copied in sector 1.
• Key 4 will correspond to key B and will be copied in sector 1.
• ...
* : If no key is stored in the reader, default keys will be required
(0xFFFFFFFF).
Carte Mifare 4K
Mapping is the same than with 1K cards. There are 80 keys instead of 32:
31 blocks will be required on the card (483/16). 13 bytes will be left empty
in the last used block.
SAGEM Défense Sécurité document. Reproduction and disclosure forbidden.
100
Block 2
L K1 K2 K3
K9 K10 K11
Block 3
Reserved
K4 K5 K6 K7
...
Block 4
Current key*
Current key*
Current key*
Current key*
Current key*
SK-0000011145-05