Sagem MORPHOACCESS 200 Installation Manual page 32

To trigger authentication, pass the user badge so the external reader
sends the user ID on MorphoAccess™ Wiegand or Dataclock input.
On MorphoAccess™ 300, the identifier is searched on every valid
database (5.3 version).
If the ID exists in the selected database, the MorphoAccess™ performs an
authentication using the biometric templates associated to this ID.
If the authentication is successful, the terminal triggers the access or
returns the user ID to central security controller.
If the authentication fails a second attempt is possible without representing
the card.
Once the person's authentication is done, the terminal automatically loops
back, selects base 0 and waits for a new input ID. This display remains for
about 4 seconds.
When using this feature with Wiegand input, ID should be a value between
0 and 65535.
SAGEM Défense Sécurité document. Reproduction and disclosure forbidden.
32
Pass your badge
For Authentication
Please
Authentication of
92745
Place your finger
Welcome
92745
AUTHENT. OK
SK-0000011145-05