Advertisement
QuickSpecs
Standard Features
Power Supply
(1) HPE 1200W Common Slot Platinum Hot Plug Power Supply
NOTE: Entry Models have a single HPE 1200W Common Slot Platinum Hot Plug Power Supply.
One of the following
depending on
(2) HPE 1200W Common Slot Platinum Plus Hot Plug Power Supplies
model
NOTE: Base and Performance Models have redundant HP1200W Common Slot Platinum Plus Hot
Plug Power Supplies.
Common Slot
One of the following depending on power requirements:
Power Supplies
HPE 1500W Common Slot Platinum Plus Hot Plug Power Supply
HPE 1500W Common Slot 48VDC Hot Plug Power Supply
HPE 1200W Common Slot Platinum Plus Hot Plug Power Supply
HPE 1200W Common Slot Platinum Hot Plug Power Supply
NOTE: 1500W power supply supports high line voltage only.
Prior to making a power supply selection it is highly recommended that the HPE Power Advisor is
run to determine the right size power supply for your server configuration. The HPE Power
Advisor is located at: http://www.hp.com/go/hppoweradvisor.
Hewlett Packard Enterprise Common Slot (CS) power supplies allow for commonality of power
supplies across a wide range of ProLiant and Integrity servers, as well as HPE Storage solutions,
and are designed to provide the highest power supply efficiency without degrading system
performance. HPE CS power supplies are tested by the Electric Power Research Institute (EPRI)
and certified through the ECOS 80 Plus power supply program. HPE CS power supply options
provide efficiency ratings of up to 94% (80 Plus Platinum) and are available in several power
output options including - 1200W, 1500W - allowing the customer to "right-size" a power supply
for their specific server configuration. All HPE Common Slot power sources are UL, CE Mark
Compliant, hot-plug and support redundant configurations.
HPE CS Platinum Plus power supplies are required when enabling HPE's Intelligent Power
Discovery (IPD) solution. IPD is the first technology to create an automated, energy-aware
network between IT systems and facilities. This allows your company to reclaim millions of dollars
in wasted power capacity and downtime costs across data centers. For more information on HPE's
IPD solution, go to http://www.hp.com/go/ipd.
NOTE: Mixing of power supplies in the same server is not supported. All power supplies must be
of the same output and efficiency rating. If non-matched power supplies are inserted you will get
errors and operation will fail.
NOTE: All pre-configured servers ship with a standard 6-foot IEC C-13/C-14 jumper cord
(A0K02A). This jumper cord is also included with each standard AC power supply option kit. If a
different power cord is required, please check the ProLiant Power Cables web page.
System Fans
6 Hot Plug Fans with N+1
redundancy
HPE ProLiant DL560 Generation9 (Gen9)
Non-redundant
Redundant
Page 6
Advertisement
