HP photosmart 630 series User Manual page 80

Problem
The Power/
Memory light
blinks as if
the batteries
are being
recharged,
but there are
no batteries
installed.
The battery
level indicator
is erratic. For
example, the
level goes
down quickly
then goes
back up.
80
Possible cause
The camera
does not
recognize that
there are no
batteries
installed.
You are using
high-power
camera modes
followed by
lower-power
camera modes,
or you are
using partially
discharged
batteries that
have not been
used for
awhile.
hp photosmart 630 series user's manual
Solution
Do nothing. The blinking is
harmless and should stop after
5-30 minutes.
This behavior is not uncommon
when you switch between
operating modes that require
more power, such as
video, and operating modes that
require less power, such as
Playback. In this case, do nothing.
The battery level indicator may
also go down quickly if you are
using the camera with partially
discharged batteries that have not
been used for awhile. In this case,
replace or recharge the batteries
when they are fully drained.
Live View or