Plastic Part Dvd Front Dvr-50; Replacing The Dvr 50 Plastic Part - JAMO DVR 50 Service Manual

Plastic part DVD front DVR-50

Ref. No. Item No.
1 74112

Replacing the DVR 50 Plastic Part

• Connect the power cord to the AC outlet and turn ON the DVR 50.
• Press LOAD (Eject) on the Remote control or on the front panel.
• When the loader tray is fully ejected turn OFF the Mains power.
This will leave the loader tray out of the DVR 50.
• Gently pull or slide the Plastic Part upwards. The Plastic Part should
now come off with a click! Note! If the Plastic Part are missing or
parts of it is missing make sure that it is not inside the DVR 50 unit.
• Click on the new Plastic Part. See picture 44-0423/50
• Turn ON the DVR 50 and make sure that the loader tray is running
smoothly in and out of the DVR 50. If not see instruction under
replacing the DVR 50 loader.
• Test the DVR 50 unit.
Fig. 44-0423/50
Part description
Plastic part DVD front DVR-50
PCS. Remarks
1
DVR 50 - Rev. 011105-2
61