Lid Grey DVR 50
Ref. No. Item No.
1
74107
Replacing the Lid Grey DVR 50
•
Disconnect the power cord from the AC
outlet and take all necessary ESD precaution.
•
Remove the Lid screws (7 screws in all)
44-0402/4/5
•
Gently pull both sides of the Lid out and
open the DVR 50 unit. 44-0402/2
•
The fore-end of the lid is connected
to the Plastic Front by two plastic loops.
Gently open the lid and remove. 44-0402/1
Note! If the angel of the lid gets too steep
the plastic loops may break!
•
Mount the new lid in the reverse order of
removing it.
Part description
Lid Gray DVR-50
Fig. 44-0402/1
Fig. 44-0402/4
Fig. 44-0402/5
PCS.
Remarks
1
Fig. 44-0402/2
DVR 50 - Rev. 011105-2
57