Western Digital My Cloud PR2100 User Manual page 93

1. Click the toggle button to ON to turn on extended logging.
System reboot is required to turn extended logging on or off. Backups, file
CAUTION!
activity and transfers may be interrupted.
2. Read the Extended Logging message, and click OK. The My Cloud device reboots.
Flash System LED
The Flash System LED option flashes the device Power LED. This option is useful when you need
to identify a specific device when you have more than one My Cloud device.
1. Click the toggle button to turn ON flash system LED.
2. Click the toggle button to the OFF position when the LED flash is no longer required.
Restore to Default
The Restore to Default area allows the Administrator to perform a restore on the My Cloud device.
Perform one of the following options to restore your system:
System Only: Reverts system settings to their default values, but retains user data and shares.
Quick Restore: Reverts all settings to their default values, erases all user data and shares, and
retains default shares. Quick Restore creates a new file table on the device, but does not fully
overwrite or erase the drive, so data recovery programs can be used to restore user data and
shares.
Full Restore: Reverts all settings to their default values, deletes all user data and shares
permanently, and retains default shares. Data recovery programs cannot be used to restore
data; all user data and shares, with the exception of the default shares, are permanently deleted.
Important: Before doing a factory restore or a system update, you may choose to save your
device's current configuration. At a later time, you can import a previously saved
configuration. Keep in mind that importing a configuration after restoring factory
defaults does not restore shares or users. See "Saving a Configuration File" on
page 88," to create or restore a configuration file.
Note: To erase all of the data on your device, see "Format Disk" on page 89
Restoring your System
Use the following steps to restore your system to one of the three available options.
1. In the Restore to Default area, click either System Only, Quick Restore, or Full Restore.
2. Click Restore.
3. Review the confirmation message and click OK. The device reboots. Don't unplug the
device during this rebooting process. Once the reboot is complete, launch the dashboard.
MY CLOUD USER MANUAL
CONFIGURING SETTINGS
.
87