Western Digital My Cloud PR2100 User Manual page 85

NFS Service
WebDAV Service
SNMP
MY CLOUD USER MANUAL
Network File System. Select this option to enable NFS Service for your
network, which allows a user to access files over a network.
• To enable/disable NFS Service, click the toggle button.
WARNING!
Mounting or ejecting a USB drive while performing a file
transfer will interrupt the file transfer process.
Select this option to enable Web Distributed Authoring and Versioning
(WebDAV) service to enable web access to content within the same
network.
• To enable/disable WebDAV Service, click the toggle button.
Note: In order to connect to the WebDAV service, use the following IP
address: http://<server ip address>:8080/Public
Simple Network Management Protocol (SNMP) manage devices over IP
networks. Select from the following to choose all, or a specific SNMP
version:
1. Click All to enable v2c and v3 SNMP versions.
• Location:
• Contact Information
• Notifications: Click the toggle button to set Notifications to ON, and
enter the Notification IP Address.
• User Management (SNMPv3): Click Users, and then click Add User.
Enter the User Name. Select the Security Level from the drop-down
menu to set authentication and encryption levels. Click the View drop-
down menu to allow queries at the System level and Network level, or
select All to allow queries to all device information.
• Click Apply.
2. Click v2c.
• Location
• Contact Information
• Notifications: Click the toggle button to set Notifications to ON, and
enter the Notification IP Address.
• Click Apply.
3. Click v3.
• Location
• Contact Information
• Notifications: Click the toggle button to set Notifications to ON, and
enter the Notification IP Address.
• To add Users, click Users, and then click Add User. Enter the User
Name. Select the Security Level from the drop-down menu to set
authentication and encryption levels. Click the View drop-down menu
to allow queries at the System level and Network level, or select All to
allow queries to all device information.
• Click Apply.
4. Click Off to turn off SNMP service.
See the WD Tech Support Downloads page at
download the MiB configuration file.
CONFIGURING SETTINGS
http://support.wdc.com to
79