5.
Remove and replace the SO-DIMM memory module.
Note: This device uses memory modules in coordinated pairs. For a list of supported
memory modules, refer to http://support.wdc.com.
6.
Once the pair of SO-DIMM memory modules have been changed, replace the unit cover and
replace and tighten the three (3) exterior screws.
Note: When replacing the cover back to the unit, be careful not to touch or damage the
components on the PCBA.
Note: Do not over-tighten the PCBA screws.
7.
Connect all external connections.
8.
Restart the device.
MY CLOUD USER MANUAL
APPENDICES
108