Western Digital My Cloud PR2100 User Manual page 79

View or change the following settings:
Drive Sleep
LCD
Power Recovery
Power Schedule
Web Access Timeout
Mac Backups
This section of the General screen enables or disables Time Machine backups of Mac computers.
Important: You must set a password for your Admin account in order to restore your Time
Machine backups.
To configure backup settings:
1. In the Mac Backups area, click the toggle button to ON to enable Time Machine backups,
if not previously enabled.
2. Click the Configure link to display the Time Machine Settings dialog.
MY CLOUD USER MANUAL
Enabling this function allows the hard drives to go into
standby mode to save power after a designated period of
inactivity. Drive Sleep is enabled to sleep after approximately
10 minutes by default.
• To enable/disable Drive Sleep, click the toggle button.
Enabling this function allows the device LCD to go into
standby mode to save power after a designated period of time.
LCD is enabled to go into standby mode after 10 minutes by
default.
• To enable/disable LCD, click the toggle button.
This option is only available for 4-bay My Cloud devices.
Automatically restarts your device from a previously
unexpected shutdown due to power failure. Power Recovery is
enabled by default.
Note: If you disable this feature, your device will not
automatically power on after an unexpected shutdown.
• To enable/disable Power Recovery, click the toggle button.
The Power Schedule allows you to schedule shutdowns for
your My Cloud device.
1. To enable/disable Power Schedule, click the toggle
button.
2. Click Configure to customize your power schedule.
3. Click on the day of the week and time(s) to schedule
shutdowns for your device.
4. Click Save.
Automatically logs you out of the system after a designated
amount of time.
• From the Web Access Timeout drop-down menu, scroll
down to select the amount of time you'd like to use for
your system timeout. The system updates automatically.
CONFIGURING SETTINGS
73