Table of Contents
Advertisement
2.2 System Board (SB)
A board for installing CPUs and memory. Internal storage can be
installed in higher-end models compared to the 2400E2/2400E3.
Features
•
Up to four SBs can be installed in a cabinet
(or up to two SBs for a 2 or 4 socket model).
•
At least one CPU and a set of memory modules (two modules) must be installed on an SB.
Up to two CPUs, 24 sets of memory modules (48 modules), one RAID card,
four 2.5-inch internal hard disk drives (HDDs) or internal solid state drives (SAS-SSDs) can be
installed on an SB.
•
In RAID configurations, hot replacements can be performed for internal HDDs and SAS-SSDs
(excluding RAID0 and non-mirror configurations).
•
RAID0, RAID1, RAID1E, RAID5, RAID6, and RAID10 are supported.
•
A hot spare disk is supported.
External Ports
For a partition, the following ports are supported for the local KVM.
(The local KVM cannot be connected permanently.
Use the video redirection function.)
When multiple SBs are used to configure partitions,
only the external ports of the Home SB are available.
•
USB 1.1/USB 2.0 x 4 (USB Type A)
•
VGA x 1 (D-sub 15pin)
PRIMEQUEST 2000 Series Design Guide
29
USB ports
VGA port
Copyright 2016-2017 FUJITSU LIMITED
Advertisement
Table of Contents
