Free Arm Cover - ELNA eXpressive920 Service Manual

Needle plate
Pin
Hook A
Setscrew
Needle plate base B
Hook A
Replacing External Parts (4)
Needle plate release lever
Hook C
4

Free arm cover

To remove:
1. Remove the presser foot. Push down the needle plate
release lever to remove the needle plate.
Remove the bed cover (see page 3).
2. Remove the threaded pin.
3. Loosen the setscrew and unhook the hook A by sliding
the free arm cover to the left.
4. Pull the free arm cover to the left and lift the part B to clear
the needle palte base, and remove the free arm cover.
To attach:
1. Place the free arm cover on the free arm inserting the
hook C into the opening.
2. Insert the right end of the free arm cover under the
front cover by pushing the right end. Push the free arm
cover until all the hooks and tabs snap in place.
3. Follow the steps 1 to 3 of removal procedure in reverse.