Setting The Date And Time - ReliOn BP200 Instruction Manual

SETTING THE DATE AND TIME

Set the monitor to the correct date and time before taking a measurement for the first time
or after replacing the batteries.
1. Press the button to show the year.
2. Push or
>
<
The year can be set between 2015 and 2045.
When the display reaches 2045, it will return to 2015.
3. Push the button to confirm the year and then the month flashes. Repeat the same
steps to change the month, day, hour, and minute.
NOTE: Press and hold
Year
>
<
Change Confirm
: Forward
>
: Back
<
4. Press the Start/Stop button to turn the monitor off.
button to change the year.
or
>
<
Month
< >
Change Confirm
button to increase the date and time values faster.
Day
< >
Change Confirm
13
Hour
Minute
>
<
Change Confirm
Change
< >
Confirm