Setting The Date And Time - ReliOn HEM-780REL Instruction Manual

780RELN IM Final 8-29-05.qxd
Set the monitor to the current date and time before taking a measurement
for the first time. If the correct date and time are not set, the measurement
values stored in the memory and the average value will not be correct.
The Blood Pressure Monitor automatically stores up to 90 measurement
values with the date and time. The monitor also calculates an average
reading based on the last three measurement values.
1. TO START THE SETTING
Press the Date/Time Setting
button to adjust the date
and time.
The year flashes on the display.
2. SETTING THE YEAR
The year can be set between 2004 and 2030.
When the display reaches 2030, it will return
to 2004.
Press the
by increments of one year.
Press the Date/Time Setting button to set
the current year.
The month flashes on the display.
NOTES: • Press the
NOTE: • Press the
Downloaded from www.Manualslib.com

SETTING THE DATE AND TIME

MEMORY up button to advance
and time values by increments of one.
down memory button to decrease the day and
time values by increments of one.
• Press and hold the MEMORY up button to increase or memory
• Press and holdthe memory down button to increase down button to decrease the date and time values faster.
manuals search engine
8/29/05 5:24 PM
MEMORY down button to decrease the day
10
Page 9