Phone Settings - Gigaset A130 Manual

Phone settings

For details on how to make audio settings, see menu overview
For details on how to set the system PIN on the base station, see the menu overview
Changing the display language
¤ u
MENU Einstellungen
The current language is indicated by
If you accidentally choose a language you do not understand:
521
¤
MENU (press the keys one after the other)
Activating/deactivating music on hold
You can make it so that your external participant hears music in case of internal recall and during call transfer.
P#Q5#1M
¤
MENU
¤
0 = off; 1 = on enter number
Repeater mode
With a repeater you can increase the range of your base station. You will need to activate repeater mode (
Repeater mode and Strahlg. aus mode (
Resetting the handset
You can reset individual settings and changes that you have made. Entries in the directory, the calls list and the handset's
registration to the base station will be retained.
¤ u
MENU Einstellungen
a
Cancel the reset with
Restoring the base station
When restoring factory settings the Strahlg. aus mode is deactivated, individual settings are reset and all lists are
deleted.
The date and time are retained.
Resetting the base via the menu
Handsets are still registered, the system PIN is not reset.
¤ u
MENU Einstellungen
Resetting the base using the key on the base
All handsets are de-registered and the system PIN is reset to the original code 0000.
Carry out the following steps: Remove the mains cable from the base. Hold down the registration/paging key on the
¢
base ( page 1) and reconnect the power cable to the base at the same time. Hold the key down for at least 5 seconds.
¤ u
¤
OK Mobilteil
‰
.
¤
The number for the current setting flashes: 
¤
OK.
¢
page 14) cancel each other out.
¤ u
¤
OK Mobilteil
.
¤ u
¤ ¤
OK Basis
9
¢
page 14.
¤ u
¤ ¤
OK Sprache
¤ u
(select language)
¤ u
¤
OK MT-Reset
¤ u
¤
OK Basis-Reset
¢
page 14.
¤ u
OK (select language)
¤
OK
¤ ¤ ¤
OK Reset? OK
¤ ¤
OK Reset? OK
¤
OK
¢
page 14).