Setting The Alarm Clock; Phone Settings; Changing The Display Language; Listening In To An External Call - Gigaset A400 User Manual

Internal consultation call/connecting
a call
You are in conversation with an external participant.
u
Press the control key
The external participant hears the music on hold.
u Before the internal participant has answered,
press the end call key
participant who answers the call.
u After the internal participant has answered you
can talk to him. Then press the end call key
call is diverted, or press the
reconnected to the external participant.

Listening in to an external call

You are conducting an external call. An internal par-
ticipant can listen in on this call and take part in the
conversation (conference).
Prerequisite: the Listening in function is activated.
Activating/deactivating listening in
Menu ¤ Settings ¤ OK ¤ Base ¤ OK
‰
¤ Listening in ¤ OK (
Internal listening in (conference)
You want to listen in to an existing external call.
c
Press and hold the key. You can listen in to the call.
All participants hear a signal tone.
To end: press the end call key
a signal tone.
If the first internal participant presses the end call key
a
, the handset that has "listened in" remains con-
nected to the external participant.

Setting the alarm clock

Activating/deactivating the alarm clock
Menu ¤ Alarm Clock ¤ OK ¤ Activation
‰
¤ OK (
= activated)
If activated:
¤ Enter wake-up time ¤ OK
When the alarm clock rings, press any key to switch it
off for 24 hours. If the alarm clock is set, the wake-up
icon l will appear on the screen and the wake-up
time will be displayed instead of the date.
Entering/changing the wake-up time
Menu ¤ Alarm Clock ¤ OK ¤ Wake-up time ¤ OK
Enter the wake-up time in hours and minutes, then
press . The alarm clock is automatically activated
OK
after the wake-up time is entered/changed.
and call one or all handsets.
a
; the call is diverted to the
a
"
display key; you are
= on)
a
. All participants hear
12

Phone settings

For details on performing audio settings and activat-
ing/deactivating warning and advisory tones and key
tones, see menu tree ¢ page 17.
For details on setting the display contrast and large
dialling numbers, see menu tree ¢ page 18.
For details on setting the system PIN on the base, see
menu tree ¢ page 18.

Changing the display language

; the
Menu ¤ Settings ¤ OK ¤ Handset ¤ OK ¤ Language
q
¤ OK ¤ Select language ¤ OK
The current language is indicated by
If you accidentally choose a language you do not
understand:
421
¤
Menu
‰
¤
(
OK = selected)

Resetting the handset

You can reset individual settings and changes that
you have made. Entries in the directory, the call list
and the handset's registration to the base will be
retained.
Menu ¤ Settings ¤ OK ¤ Handset ¤ OK
¤ Reset Handset ¤ OK ¤ Reset? ¤ OK
Cancel the reset with
Resetting the base to the default
settings
When restoring factory settings:
u Individual settings are reset
u All lists are deleted
Only the date and time are retained.
Software reset
Menu ¤ Settings ¤ OK ¤ Base ¤ OK ¤ Base Reset ¤ OK
¤ Reset? ¤ OK
Hardware reset
Additionally
u All handsets are deregistered and
u The system PIN is reset to the original code 0000.
Disconnect the power cable from the base. Hold
down the registration/paging key (¢ page 1) on the
base and reconnect the power cable to the base at
the same time. Release the key after approximately
5 seconds.
‰
.
¤ q Select language
a
.