Advertisement
ZONE 2
Up to 5.2 speaker connection
6
HDMI
MAIN ZONE
SPEAKER CONNECTION TO ZONE 2
PLAYING THE SAME AUDIO IN BOTH ZONES.
1 Switch on Zone 2
– Using the remote: press and hold the Zone 2
button, then press the Standby button
– Using the Cambridge Connect app
– On Front panel: press the Zone 2 button
(Zone 2 will be shown on the display), then
press the Standby button
– In the Zone 2 Settings menu within the OSD:
Zone 2 Power On
2 Ensure the Back Amp channels are set to
'Zone 2' in the Speaker Setup.
CXR Setup Menu
Speaker Setup
Speaker Configuration
Input Setup
Auto Setup
Zone 2 Settings
Unit
Metres
Network Setup
SW Selection
Subwoofer1+Subwoofer2
General Settings
Back Amp Configuration
Zone 2
HDMI Output Setup
Advanced Setup
Notes:
• When using Follow Main, the same audio will be heard in both zones. Whatever source is
selected in the Main Zone will be repeated as stereo in Zone 2.
• When configured for Zone 2, the back amp channels cannot be used for bi-amping or 7.2 in the
main zone. 5.2 speaker channels is the maximum speaker configuration in the main zone when
using the zone 2 speaker output.
• It is not possible to configure the second subwoofer output for Zone 2 use.
CXR200
ZONE 2 SETUP GUIDE
3 Setting the Zone 2 Source to 'Follow Main
Zone' will ensure that any audio (multi-
channel or stereo) that is playing in the Main
Zone will be duplicated and sent to Zone 2.
CXR Setup Menu
Speaker Setup
Zone 2 Power
On
Input Setup
Zone 2 Source
Follow Main Zone
Zone 2 Settings
Zone 2 Power On Volume
- 30 dB
Network Setup
General Settings
HDMI Output Setup
Advanced Setup
Any multi-channel audio source (eg. Blu-ray
movie) playing in the Main Zone will be sent to
Zone 2 as a 2CH PCM (stereo) downmix when
►
►
Follow Main is selected.
Advertisement
