Manual Tv Channel Search; Using The Satellite Receiver; Follow Tv (Automatic Tv Channels Sorting) - Philips VR558 Instruction Manual

Manual TV channel search

In some cases it can occur that all of the TV
channels are not found and saved during the first
installation. In this case, the missing or coded TV
channels must be searched for and stored man-
ually.
1.
1. Switch on the TV set. If required, select the
programme number for the video recorder.
2.
2.
Press .
MENU
The main menu will appear.
3.
3.
Use or
PLAY B-K
SET UP'. Then press
4.
4.
Use or
PLAY B-K
AL TUNING'. Then press
5.
5. Select 'PROG.' with
Then press
FWD 1- B
MANUAL TUNING
PROG.
CHANNEL
DECODER
SKIP
VIDEO MODE
SELECT K L CHOOSE B
END=EXIT
6.
6.
With or
PLAY B-K
the desired programme number that you want
to use for the TV channel, e.g. 'P01'. Then
press
FWD 1- B
What is a special channel?
TV channels are transmitted in certain pre-
defined frequency ranges. These ranges are
divided into channels.
A specific frequency/channel is assigned to each
TV station.
Certain frequency ranges are specified as special
channels (hyperband channels).
7.
7.
Select 'CHANNEL' with
and confirm with
desired channel with
If you set ' SKIP ' on for a channel, this channel
will be ignored when going through the channels
PROG P +
with or PROG P–
I don't know the channels for my TV stations
In this case, press
PLAY B-K
'CHANNEL' to start the automatic channel
search. A changing channel number will appear
on the TV screen. Continue the automatic search
until you have found the desired TV channel.
8.
8.
Save the TV channel with
9.
9.
To search for other TV channels, begin again
at step 5.
10.
10. To end, press
STATUS/EXIT
to select 'TUNER
STOP C-L
.
FWD 1- B
to select 'MANU-
STOP C-L
.
FWD 1- B
or
PLAY B-K STOP C-L
.
P55
055
[OFF]
[OFF]
[SECAM]
, select
or
0..9
STOP C-L
.
or
PLAY B-K STOP C-L
. Then enter the
FWD
1- B
0..9 .
.
or
STOP C-L
.
FWD
1- B
.
How do I change 'VIDEO MODE'?
If you want to change the video mode, select
'VIDEO MODE' with
Then, press
mode.

Using the satellite receiver

Satellite channels from a satellite receiver (con-
nected to the scart socket AV2(DECODER) ) are
received on the video recorder on programme
number 'AV2' with 0.0.2 .
You should select the satelite channels to be
received by the satellite receiver directly on the
.
receiver itself.
Follow TV (Automatic TV channels
sorting)
When the automatic channel search function is
activated, the TV channels are saved in a specific
order. This may vary from the order of TV chan-
nels on the TV.
This function changes the order of TV channels
saved in the video recorder to match that of the TV.
Make sure that the video recorder and the TV
are connected by a scart cable.
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2. Press
3.
3.
Select 'TUNER SET UP' with
STOP C-L
4.
4. Select 'FOLLOW TV' with
and confirm with
,
5.
5. 'P:01' will appear in the video recorder display.
in
6.
6.
Select programme number '1' on the TV.
I cannot switch my TV set to programme
number '1'
* If you have connected additional devices to
socket AV2(DECODER), please disconnect
these devices. Because of other connected
devices, the TV set could switch to the pro-
gramme number of the scart socket.
5
PLAY B-K
FWD 1- B to select your desired
. The main menu will appear.
MENU
and confirm with
PLAY B-K
.
FWD 1- B
SELECT K L CHOOSE B
AUTO TUNING
MANUAL TUNING
FOLLOW TV
MOVE
END=EXIT
.
or
STOP C-L
PLAY B-K
.
FWD 1- B
or
STOP C-L
EN